Uniden D17882 Cordless Telephone User Manual


 
English - 5
Set Up the Accessory Handsets
Install and Charge the Battery
1. Unpackallhandsets,batterypacks,andbatterycovers.
Ifyouneedtoremoveacover,pressinonthenotchandslidethecover
downandoff.
2. Lineupthebatteryconnectorwiththejackinsidethehandset;the
connectoronlyfitsoneway.
3. Pushtheconnectorinuntilitclicksintoplace;tuggentlyonthewires
tomakesurethebatteryissecurelyconnected.
4. Replacethebatterycoverandslideitintoplace.
Connect the Charger
1. UseanACadaptertoconnectthepowerjackoneachchargertoa
regularindoor(120VAC,60Hz)poweroutlet.
2. Placeeachhandsetinachargerwiththedisplayfacingforward.Ifthe
displaydoesn’tlightup,reseatthehandsetorconnectthechargertoa
differentoutlet.
# Charge all handsets completely (about 15 hours) before using.
Test the Connection
Pickupeachhandsetandpress
tAlK/flAsh
.Youshouldhearadialtoneand
thedisplayshouldsay
Talk
.
Ifthereisnoiseorstatic,seepage22fortipsonavoidinginterference.