Uniden D17882 Cordless Telephone User Manual


 
English - 14
Using Call Waiting
• CallWaiting,aserviceavailablefromyourtelephoneprovider,letsyou
receivecallswhileyouareonanothercall.CallerIDonCallWaiting
(CIDCW)servicedisplaysCallerIDinformationforawaitingcall.
• IfyougetaCallWaitingcall,thephonesoundsatoneanddisplaysany
CIDinformationreceivedfromthewaitingcall.Press
flAsh
onthebase
or
tAlK/flAsh
onthehandsettoswitchbetweenthecurrentcallandthe
waitingcall;eachtimeyouswitch,thereisashortpausebeforeyou're
connectedtotheothercall.
Using the Phonebook
Thephonecanstoreupto100entriesinitsphonebook.Allstationsshare
thesamephonebook,soonlyonestationcanaccessitatatime.
To... Press...
open/close the phonebook
PhonebooK
.
scroll through the entries
Down
to scroll through the entries from A to Z.
uP
to scroll from Z to A.
jump to entries that start
with a certain letter
the number key corresponding to the letter
you want.
dial the current entry
tAlK/flAsh
or
sPeAKer
on the handset.
On the base, pick up the corded handset.
edit the current entry
Menu/select
, then select
Edit
.
delete the current entry
Menu/select
, then select
Delete
. When the
phone prompts you to confirm, select
Yes
.
make a speed dial call
Press and hold the speed dial number (0 - 9)
for 1.5 seconds. The speed dial entry displays.
Press
tAlK
or
sPeAKer
to dial the number.
Adding Phonebook Entries
1. Withthephoneinstandby,openthephonebook.
2. Press
Menu/select
andselect
Create New
.
3. Thescreendisplays
Edit Name
.Enterthenameandpress
Menu/select
.
4. Thescreendisplays
Edit Number
.Enterthephonenumber(upto20
digits)exactlyasyouwoulddialit.Press
Menu/select
.
If you need the phone to wait before sending the next set of digits,
press
reDIAl/PAuse
to insert a 2-second pause. You can insert multiple
pauses, but each one counts as a digit (you’ll see
P
in the display).