Filter
Top Products
English - 9
Using Call Waing
x Call Waiting, a service available from your telephone provider, lets you receive
calls while you are on another call. Caller ID on Call Waiting (CIDCW) service
displays CID information for a waiting call.
x If you get a Call Waiting call, the phone sounds a tone. Press
TaLk/fLash
to
switch between the current call and the waiting call; each time you switch,
there is a short pause before you’re connected to the other caller.
Mul-Handset Features
# To use the features in this section, you need at least 2 handsets.
Handset to Handset Intercom
x You can make an intercom call from any handset, but only two handsets can be
in an intercom call at any time.
x If an outside call comes in during an intercom page, the phone cancels the page
so you can answer the incoming call.
x If an outside call comes in during an intercom call, press
TaLk/fLash
to hang up
the intercom call and answer the outside call.
To page another handset To answer the page
1. With the phone in standby, press
INTERcoM/cLEaR
.
2. Select the handset you want to page, or select All.
(To cancel, press
ENd
.)
Press
TaLk/fLash
or
INTERcoM/cLEaR
.
To end an intercom call, press
ENd
. Both handsets return to standby.
Call Transfer
To page another handset To answer the page
1. During a call, press
INTERcoM/cLEaR
. The phone
puts the call on hold.
2. Select the handset you want to page, or select All.
(To cancel and return to the call, press
TaLk/fLash
.)
3. When the other handset accepts the call, you’ll be
disconnected (press
TaLk/fLash
to rejoin the call).
1. Press
INTERcoM/
cLEaR .
Speak to
the other handset.
2. Press
TaLk/fLash
to speak to the
caller.
Conference Calling
x When an outside call comes in, two handsets can join in a conference call with
the outside caller.
x To join a call that’s already in progress, just press
TaLk/fLash
or
spEakER
.
x To leave the conference call, hang up normally; the other handset remains
connected to the call.