Filter
Top Products
English - 13
3. The system announces the time, the number of messages in memory, and a
help prompt. It beeps to let you know it’s waiting for a command; enter a
2-digit command
from the chart.
# If you don’t press
any keys for 15
seconds, the
system hangs
up and return to
standby.
IMPORTANT INFORMATION
Troubleshoong
General problems Possible solutions
I can’t make or receive
calls.
xCheck the telephone cord connection.
xDisconnect the base AC adapter. Wait a few
minutes, then reconnect it.
xMake sure the base is plugged in.
The handset won’t ring. xMake sure the ringer is turned on.
The handset is not
working.
xCharge the battery for 15-20 hours.
xCheck the battery connection.
The handset won’t
display CID information.
xLet calls ring twice before answering.
xMake sure your CID service is active.
Audio issues Possible solutions
I hear a beeping
during a call.
xThe battery is getting low. Check the handset for a low
battery alert. Finish your conversation and return the
handset to the cradle as soon as possible.
There’s a lot of
noise or static
on the line
xCheck for interference from appliances (microwave
ovens, TVs, etc.) or wireless devices (baby monitors, WiFi
equipment, etc.). Move the handset or base away from the
interference source.
xMove the handset closer to the base.
xIf you use a telecoil hearing aid, turn the T-coil on (see p. 6).
Multi-handset problems Possible solutions
I can’t transfer calls.
xYou may have to reset the handset.
Contact Customer Service for instructions.
Two handsets can’t talk to a caller. xSee if any handset is in Privacy Mode.
01 Repeat message 05 Stop playback
02 Play message 06 Turn the system on
03 Skip message 09 Turn the system off
04 Delete message 10 Hear help prompts