Filter
Top Products
GETTING STARTED [8]
www.uniden.com
D. Mount the Main Base on a Wall
Standard wall plate mounting
This phone can be mounted on any
standard wall plate.
1) Locate the main base unit on the
wall mount adapter as shown and
slide the wall mount adapter into
the notches on the main base
bottom with the tab pressed.
2) Plug the AC adapter to the DC IN
9V jack.
3) Route the AC adapter cord through
the molded wiring channel as
shown.
4) Plug the AC adapter into a standard
120V AC wall outlet.
5) Plug the telephone line cord into
the TEL LINE jack. Route the cord
through the molded wiring channel
as shown.
6) Plug the telephone line cord into
the telephone outlet.
7) Align the mounting slots on the
main base with the mounting posts
on the wall. Then push in and down
until the phone is firmly seated.
1
2
3
4
5
6
7
7
GETTING STARTED
U037.book 8 ページ ２００４年２月２５日 水曜日 午後６時１０分