Uniden DXI 7284-2 Series Cordless Telephone User Manual


 
ADDITIONAL INFORMATION [36]
www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom Suggestion
The charge/in use LED or
charge LED won't illuminate
when the handset is placed in
the cradle.
Make sure the AC adapter is plugged into the cradle and wall outlet.
Make sure the handset is properly seated in the cradle.
Make sure the charging contacts on the handsets are clean.
The audio sounds weak and/or
scratchy.
Move the handset and/or main base away from metal objects or appliances and try again.
•Press the select/channel key in the Talk mode to help eliminate background noise.
Make sure that the handset is not too far from the main base.
Can't make or receive calls. Re-register both handsets (see page 12).
Check both ends of the telephone line cord.
Make sure the AC adapter is plugged into the main base and wall outlet.
Disconnect the AC adapter for a few minutes. Then reconnect it.
Make sure that the handset is not too far from the main base.
Check the dialing mode used by your telephone company.
ADDITIONAL
INFORMATION
U037.book 36 ページ 2004年2月25日 水曜日 午後6時10分