Filter
Top Products
44
Selecting the message record time
You can set your answering system to record messages up to one
or four minutes long.
One minute option:
move the
REC TIME
switch to
1
.
Four minutes option:
move the
REC TIME
switch to
4
.
Announce only feature:
The announce only feature plays an outgoing message, but it will
not allow the caller to leave a message. Move the
REC TIME
switch to the
ANN
position.
The message counter LED displays “ ” when system is on
standby.
Prerecorded outgoing message for Announce only feature is:
"Hello, no one is available to take your call."
REC TIME
ANN/4/1
Selecting a PIN code
To play your messages from a remote location, you will need to
enter a two-digit Personal Identification Number (PIN) code
(00-99). To select a PIN, perform the following steps.
1 On the base, press and hold
button until beep sounds, and the
LED displays 00.
2 To set the first number, press
or to scroll from 00 to 90.
When the desired number appears in
the display, press . This selects
the first number.
3 To set the second number, press
or to scroll from 0 to 9.
When the desired number appears in
the display, press . This selects
the second number and then the
entered number is announced.
pin
pin
pin
Press or
multiple times to scroll
through numbers on the
display.
ª
EXAI 8985 HEN 99.8.20 0:14 PM Page 47