Filter
Top Products
29
4 Press the or key to
select “
Edit Memory”,
then press .
The following screen appears.
The cursor flashes indicating that the display is ready for the
name to be edited. When a name has not been stored, the
cursor appears at the beginning of the second line
.
5 Press , , , , or to edit the
name. (See page 24.)
To edit only the phone number, skip this step.
6 Press .
The following screen appears.
The cursor flashes indicating
that the display is ready for the number to be edited.
7 Use the dial keypad, , or key to edit the phone
number.
The phone number cannot exceed 20 digits. (See page 24.)
When the phone number will not be edited, skip this step.
8 Press .
The handset beeps and displays
the confirmation screen. The
memory storage is complete.
For example, if you store a name and number into memory location
number 01, the display shows “Memory01 stored”.
After about 2 seconds,
“
Memory Store” is
displayed.
9 Press to return to standby mode.
Store Name
UNIDEN CORP
•
ª
select/ch
•
ª
/tone/
0
*
#/
1
del
Store Number
817858330
select/ch
Memory01 Stored
redial/p
select/ch
del
Memory Store
01 UNIDEN CORP
02 JOHN DOE
mem
Display a Programmed Number
Use the and key to toggle between the names
display and the numbers display.
Program name Program number
• When the stored phone number has 14 or more digits, “ \” is
displayed next to the 12th digit.
Press to see the extra digits and to return.
/tone/
0
*
#/
1
1
1
Memory Store
01 8178583300
02 5452930
Memory Store
01 UNIDEN CORP
02 JOHN DOE
1
1
Memory Store
300000
Memory Store
06 011813554329
07
/tone/
0
*
#/
1
EXAI 8985 HEN 99.8.20 0:13 PM Page 32