Uniden 2300 Cordless Telephone User Manual


 
[ 36 ]
The digital security code is an identification code used to connect the handset and the
base unit. Normally, setting the code is not necessary. In the rare situation that you
suspect another cordless telephone is using the same security code, you can change
the code.
To change the digital security code:
1. Perform the System Reset menu options (De-register the Handset and
Replacing the Base Setting) for the handset (see page 15).
2. To register the handset do the following steps:
1) Place the handset in the base.
2) Registration starts automatically.
While registering Handset Registering appears in the display.
3) When the registration is complete, Registration Complete appears in the display.
If the registration fails, Registration Failed appears in the display. Try the steps
above again.
CHANGING THE DIGITAL SECURITY CODE
ADDITIONAL
INFORMATION
UP349BH (WDECT2300) ENG OM 5/12/04 10:54 AM Page 36