![](http://pdfasset.owneriq.net/b/15/b15b72a6-0481-4926-9723-0e79946fef01/b15b72a6-0481-4926-9723-0e79946fef01-bg14.png)
Global Setup
Setting Name Tag (POP ID)
1) Enter the Global Setup menu, and then the Name Tag submenu (see “Entering the
Menu” on page 11).
2) Press /vol/ or /vol/ to change the selection, On or Off.
3) Press . You will hear a confirmation tone.
Setting Insert Zero (New Zealand only)
1) Enter the Global Setup menu, and then the Insert 0 submenu (see “Entering the
Menu” on page 11).
2) Press /vol/ or /vol/ to change the selection, On or Off.
3) Press . You will hear a confirmation tone.
Setting Day and Time
1) Enter the Global Setup menu, and then the Day & Time
submenu (see “Entering the Menu” on page 11).
2) Press /vol/ or /vol/ to select the day of
the week, and then press .
3) Press /vol/ or /vol/ to set hour and then
press .
4) Press /vol/ or /vol/ to set minute and then press .
5) Press /vol/ or /vol/ to choose AM or PM, and then press .
You will hear a confirmation tone.
Setting the Dial Mode (Australia only)
1) Enter the Global Setup menu, and then the Dial Mode
submenu (see “Entering the Menu” on page 11).
2) Press /vol/ or /vol/ to change the
select, Tone or Pulse (the initial setting is Tone).
3) Press . You will hear a confirmation tone.
[ 14 ]
Day & Time
SUN 12:00 AM
[ / / / /SELECT]
For setting the Day
and Time, the idle
time-out is extended
to 2 minutes.
Dial Mode
Tone
Pulse
UP349BH (WDECT2300) ENG OM 5/12/04 10:53 AM Page 14