Uniden 2300 Cordless Telephone User Manual


 
[ 10 ]
Global Setup
Submenu name Description
Day & time Set the day and time of your display (see page 14).
Name Tag (POP ID) Display the stored name with the Caller ID telephone number, if the displayed
(Default is on) Caller ID telephone number is exactly the same as a number stored in the
phone book (see page 14).
Insert 0 Add 0 or 00 to the number, when you receive the Caller ID message
(New Zealand only) (see page 14).
Dial Mode Set the dial mode to tone or pulse (see page 14). Most phone systems use tone
(Australia only) dialing, which send DTMF tone through phone line. The default is tone dialing.
(Default is tone) Depends on your dialing system, set the dial mode.
System Reset
System Reset is used to clear the handsets ID from the main base unit, or the
base ID from the handset.
Submenu name Description
Deregister HS Clear the handset ID from the base. Use this option, for example, when you change
the digital security code (see page 15).
Replacing Base Clear the base ID. Use this option, for example, if you wish to deregister the base
to use the handset with another base of the WDECT2300, WDECT2315 and
WDECT2355 series (see page 15).
UP349BH (WDECT2300) ENG OM 5/12/04 10:52 AM Page 10