Uniden 1380 Conference Phone User Manual


 
29
Inserting a Pause in the Dialing Sequence
Press the REDIAL/PAUSE button to insert a delay in the dialing sequence of
a stored telephone number when a pause is needed to wait for a dial tone (for
example after you dial 9 for an outside line, or to wait for a computer access
tone). Each pause is represented as “P” on the display and counts as 1 digit in
the dialing sequence.
Changing a Stored Number
Repeat the storage sequence under “Storing A Name and Number in Memory”,
and use the DELETE button to delete the old number before entering the new
number.
Dialing a Number Stored in Memory While On-
hook
1. Press the DIAL button.
2. To select a memory, press any number key (0-9, A, B, C). The number in that
memory location displays.
Note: You may select a different memory location by pressing the
SKIP or REPEAT button to scroll through the memories or press a
number key (0-9, A, B, C).
3. Press the SPEAKER button, or pick up the handset to dial the displayed
number.
Dialing a Number Stored in Memory
1. Lift the handset, or press the SPEAKER button.
2. Press the DIAL button then press a memory location button.