Filter
Top Products
USING THE ANSWERING MACHINE
47
Answering System
OPERATION (during playback) Press
NOTES:
*1 If you have more messages after 4 minutes have passed, you must press
again listen to the rest of the messages.
*2 If you press , within about 4 seconds after a message begins playing,
the ANSWERING MACHINE replays the previous message. If the current
message is the first new message, the ANSWERING MACHINE plays back
from the beginning of the current message( it does not play old message).
1
#
2
#
To repeat an incoming message *
2
To skip to the next message
To delete individual messages
To stop playback
5
#
4
#
3
#
1
#
• Enter the command within 15 seconds while you hear intermittent beeps.
Otherwise, the line is disconnected.
• When you call your phone while the message storage area is full, you will
hear several short beeps after the 10th ring. Enter and your security code
(PIN), then you can continue to enter the commands.
• During operation from a remote location, [ ], appears on the LED display.
#
For your handy reference guide, cut out the remote operation cards on
page 53.
TABLE OF COMMANDS
The following commands can only be accepted after pressing
(Playback), then and MAILBOX number (1-3).*
1
#
2
#
The following commands are accepted during command prompt.
OPERATION Press
To delete all the messages in the desired
MAILBOX
To stop operation
To turn the answering system on
To record a memo message (Up to 4
minutes)
To stop recording a memo
To record your greeting message
To stop recording your greeting message
To turn the answering system off
To play Help Guidance
then and MAILBOX number
(1-3)
then and MAILBOX number
(1-3)
or
or
0
#
9
#
8
#
5
#
8
#
7
#
5
#
#
7
#
6
#
5
#
#
4
#
SX-2981.qx 6/18/1 3:12 PM Page 47