Filter
Top Products
40
USING THE MENU MODE
Answering System
SETTING THE NUMBER OF RINGS
Select one of four ring time settings ( : 2 rings, : 4 rings,
: 6 rings, : Toll Saver).
1 Press five times.
The current ring time is displayed on the LED display.
2 Press to change the ring time.
3 Press or or until the desired ring time
appears ( : 2 rings, : 4 rings, : 6 rings, : Toll Saver).
4 Press to set the new ring time.
The answering machine announces the ring time that you
have set.
TS (TOLL SAVER MODE): The phone answers at the second ring
when there are new messages, and the fourth ring when there are no
new messages.
When you check the message from the outside phone, hang up if you
hear the third ring to save the toll charge.
SETTING THE RECORDING TIME
Select one of two maximum recording times or Announce Only ( : 1
minute, : 4
minutes, : Announce only).
1 Press six times.
The LED display shows the current recording time.
2 Press to change the recording time.
3 Press or until the desired time appears
( : 1 minute, : 4
minutes, : Announce only).
4 Press to set the new recording time.
The system announces the recording time that you have set.
A (Announce Only): If you set the recording time to A, the selected
greeting message will be announced and no incoming message will be
accepted. The LED display shows " ".
SET
SELECT
SELECT
SET
MENU
SET
SELECT
SELECT
SET
MENU
SX-2981.qx 6/18/1 3:11 PM Page 40