Filter
Top Products
Administrator Programming
IP5131-SDL Settings
152 Strata CIX IP5000-series Telephone UG 04/09
Dynamic Port Base
1. From IP Configurations > Advanced > > Dynamic
Port Base. The Dynamic Port Base screen displays
(shown right).
2. Enter the new port number (maximum 5 characters).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
VLAN - Virtual LAN
1. From IP Configurations > Advanced > > >
VLAN. The VLAN screen displays (shown right).
2. Press the Enable or Disable softkey to change the set
value. The value set is underlined in the display.
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
Phone VLAN ID
1. From IP Configurations > Advanced > > >
VLANID. The Phone VLAN ID screen appears
(shown right).
2. Enter the new number (maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change and
go to the Advanced Setting screen.
Dynamic Port Base
48751
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
VLAN
Enable
Disable
[Set] [Cancel]
Config
Phone VLAN ID
1
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New