Filter
Top Products
Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 04/09 147
GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port.
The current GRQ Port Number displays (shown
right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Advanced Setting screen.
Note For other notes, refer to “Station ID” on page 142.
RRQ Port Number
1. From IP Configurations > Advanced > RRQ Port. The
current RRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change
...or press the Cancel soft key to cancel the change
and go to the Network Setting screen.
Note For other notes, refer to “Station ID” on page 142.
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays
(shown right).
Note The Application Server Address can be an IP
Address or a URL (alphanumeric). See “Dial Pad
Alphanumeric Characters” on page 148 to enter the
URL.
2. Follow the steps “To change settings on the screen” on
page 140. Also see Table 21 on Page 148 for
additional information.
GRQ Port Address
0
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
RRQ Port Number
0
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
Application Server Addr
192.168. 0. 235
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New