Filter
Top Products
Basic Skills
Instruction Manual 2-7
Version
1
Last Saved on 19/10/01 11:52
TOSHIBA Pocket PC e570 – Ppc_e570.doc – ENGLISH – Printed on 19/10/01 as 01_GENUK
Initial Setup
When using the Pocket PC for the first time, carry out initial setup
according to the procedures below after a built-in battery has been
charged.
1. Press the power button to turn the power on. The Welcome screen
appears. Tap the screen to start the following setup.
2. Execute touch screen correction.
When the align screen appears, tap the center of the cross target with
the stylus. The next target position changes upon tapping the target.
Five taps completes the positioning correction. The screen then
changes to the Stylus screen.
■ If a finger or any other object touches the screen during correction,
the correction will be canceled. Repeat the correction procedure.
3. Read how to use the stylus.
■ Read and understand the stylus operation, and then tap NEXT.
For more information on stylus operation, see “How to Use the Stylus” in
Chapter 2.
4. Learn the pop-up menu operation.
■ Read the on-screen explanation and then operate the screen.
Display the pop-up menu, and cut and paste the data according to
the screen instructions.
■ When you finished the paste operation, this stage is completed.
Tap NEXT.
5. Set the ZONE.
■ When tapping the right ▼ mark, the city and the time zone lists
appear. Tap the desired city and time zone.
■ When the setup is completed, tap NEXT.
6. To complete the initial setup.
■ When the Complete screen appears, the initial setup is completed.
■ After tapping the screen, you can use the Pocket PC.
When you tap the Complete screen, the Today screen appears. For more
information on the Today screen, see “Today screen” in Chapter 2.