Filter
Top Products
The LCD displays date/day/time. The LCD then displays “SENT NNNM”
at originating station, and the originating station number and a message
indication are displayed on the destination station LCD.
remote CALLING STATION MESSAGING
The LCD displays “MODE?”
The LCD displays “MODE 95 DEST EKT NO.?”
The LCD displays “MODE 95 DEST EKT NO.NN”.
The LCD displays “MSG NO.?”
The LCD displays the message.
The LCD displays “MSG NO.?”
NOTE:
Group calling station messaging allows you to set a calling station
message for only one station at a time.
The LCD displays “MODE NO.?”
Your LCD shows the time and date. The message is displayed at the
“destination” station. Any station calling the “destination” station receives
the message.
BUSY STATION MESSAGING
When reaching a busy LCD station, a message can be sent to that
station (an audible tone will be heard). The busy station may also return
a message to the calling station’s LCD. The two stations may continue
this procedure to carry on a “silent” conversation. Soft Keys must be off
(Mode 70) at the sending and receiving stations for this feature to
operate.
STRATA DK MESSAGES AND MEMOS
4-12
10. Dial 0.
To Receive a Called Station
Message:
1. Press the Intercom and
Msg button.
To Set a Calling Station
Message for Another Station:
1. Press the Mode button
when your telephone is idle.
2. Dial 9 5.
3. Dial the “destination” station
number.
4. Press the Page button.
5. Enter the desired message
number.
6. Press the Page button.
7. Press the Mode button.
8. Dial 0.