Topcom E400 Cordless Telephone User Manual


 
English
1
Safety instructions
English
1 Safety instructions
Only use the charger plug supplied. Do not use other chargers as this may damage the battery
cells.
Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable
batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the
battery compartment of the handset).
Do not touch the charger and plug contacts with sharp or metal objects.
The operations of some medical devices may be affected.
The handset may cause an unpleasant buzzing sound in hearing aids.
Do not place the basic unit in a damp room or at a distance of less then 1.5 m away from a
water source. Keep water away from the handset.
Do not use the telephone in environments where there is a risk of explosions.
Dispose of the batteries and maintain the telephone in an environment-friendly manner.
As this telephone cannot be used in case of a power cut, you should use a mains-independent
telephone for emergency calls, e.g. a mobile phone.
2 Getting started
2.1 How to use this user guide
In this user guide, following method is used to clarify the instructions:
Key to press.
2.2 Installing the base
For installation, do the following:
1 Plug one end of the adaptor into the outlet and the other end into the adaptor jack on the back
of the base.
2 Connect one end of the telephone cord with the wall phone jack and the other end to the bottom
of the base.
3 Put the telephone- and AC power line cord in the base guides as shown on picture 2A.
Text....... “DISPLAY”.
Text that appears on the display of the phone is shown in the right column
between quotation marks.
This product works with rechargeable batteries only. If you put non-rechargeable
batteries in the handset and place it on the base, the handset will be damaged and
this in NOT covered under the warranty conditions.