Filter
Top Products
4.17 Automatic answering
It is possible to program the unit in such a way that, when you receive a
call, you only have to pick up the handset to connect directly to the
external caller. It is no longer necessary to press the Line button first
to accept the call.
• Press the Set button .
• Press numerical button ‘4’.
• Press numerical button ‘1’ to activate/deactivate this function.
• Press the Memory button . The unit emits a confirmation tone.
Default setting : off
Note : When a call comes in and the handset is not lying on the base unit, you
always have to press the Line button to accept the call, even when the func-
tion ‘Automatic answering’ is activated.
4.18 Default settings (Reset)
If you want to reset the default settings of the unit, please take the
following steps :
• Press the Set button .
• Press numerical button ‘0’.
• Enter the 4 digit PIN code.
• Press numerical button ‘1’ to select whether or not you want to reset
the default settings, indicated by (y) yes or (n) no.
• Press the Memory button . The unit emits a confirmation tone.
Note : When you reset the default settings, all memory numbers will be erased.
4.19 Programming the PIN code
When you change the PIN code, it is very important not to forget the
new PIN code !
• Press the Set button .
• Press button ‘#’.
• Enter the present 4 digit PIN code.
• Enter the new 4 digit PIN code.
• Press the Memory button . The unit emits a confirmation tone.
Default setting : ‘0000’
4.20 Setting the display contrast
• Press the Set button .
• Press numerical button ‘9’.
• Enter the desired contrast (1-9) by pressing numerical button ‘1’ several
times.
• Press the Memory button .
Cocoon 85/95
32