Filter
Top Products
Topcom Allure 200 7
Topcom Allure 200
ENGLISH
Note: The Redial button can also be used as a Pause button while entering a
telephone number !
The letter ‘P’ appears on the display on the location where you have added a pause of
3 sec.
5.2 Deactivating the microphone (mute)
It is possible to deactivate the microphone of the handset during a conversation by pressing
the Mute button . You can now talk freely without the caller hearing you.
Press the Mute button again if you want to resume your conversation.
5.3 Music on hold
It is possible to put the caller on Hold during a conversation by pressing the Music on Hold
button . You can now talk freely without the caller hearing you. The caller will hear a digital
melody. The melody can be changed by pressing the Up or Down button.
Press the Music on Hold button again if you want to resume your conversation.
5.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted by means
of the Ring Volume switch at the bottom of the phone (Hi- , Lo- ).
5.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided
by your telephone company); or to transfer phone calls when you are using a telephone
exchange (PABX).
The flashtime can be selected by the switch on the bottom of the phone (100/300/600ms).
6 Caller ID
6.1 General information
When you have a subscription to the Caller ID service, the caller’s phone number and name
(when supported by the network) will appear on the display. If you saved the telephone
number with the name in the Phone Book, the programmed name will be shown on the
display (name tagging function).
6.2 Call list
The size of the call list has been set when initializing the telephone. The phone numbers you
have received more then once, will not be stored, but the repeat indicator REP will be
displayed. Every incoming number is saved in the Call List with indication of date and time.
In standby mode the number of received calls is shown on the display ‘ALL CALLS 000
(always English). The new message LED will blink until you have checked all New
messages.