Filter
Top Products
Topcom Allure 200 5
Topcom Allure 200
ENGLISH
• Use the Up or Down button to select the desired display contrast.
• Press the Volume Up / Delete button / to go to the next setting.
• If no button is pressed within 10 seconds, the unit will return to standby mode.
4.3 Setting the Date and Time
When you have a subscription to the Caller ID service and your telephone provider sends the
date and time together with the telephone number, the phone’s clock will be set
automatically. The year must always be set manually.
It is also possible to set the clock manually:
• Press the Volume Up / Delete / button for 3 seconds, the display language is
shown.
• Press the Volume Up / Delete / button 2 times. The year will blink.
• Use the Up or Down button to select the year.
• Press the Volume Up / Delete / button confirm the year and change to month.
• Repeat the previous steps for changing and confirming month, day, hour and minutes.
• After confirming the minutes, you will go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
4.4 Setting the Local Prefix (5 digits)
The Local prefix must be set, when you are not allowed to dial out your own area code.
If there is an incomming call, starting with the programmed prefix, the code will not be
displayed and not be stored in the call list.
ex. When 012 is programmed and 0123456789 is the incomming call number, 3456789 is
displayed and stored in the call list.
• Press the Volume Up / Delete / button for 3 seconds, the display language is
shown.
• Press repeatedly the Volume Up / Delete / button until ‘SET LOCAL CODE ‘ is
display.
• Use the Up or Down button to select the first digit of the local code (0-9 or ‘-’ to
unselect)
• Press the Volume Up / Delete / button confirm the first digit and change next digit.
• Repeat the previous steps for the other digits (max. 5 digits).
When no local prefix is used set (- - - - -).
• After confirming the last digit, you will go to the next setting.
If no button is pressed within 10 seconds, the unit will return to standby mode.
4.5 Setting the Long Prefix
If you need to dial out a one digit prefix before a telephone number from the call list or
phonebook, you have to set the Long Dial Prefix.
• Press the Volume Up / Delete / button for 3 seconds, the display language is
shown.
• Press repeatedly the Volume Up / Delete / button until ‘LONG PRFIX‘ is display.