Filter
Top Products
Topcom Butler 4812 USB VoIP 33
Topcom Butler 4812 USB VoIP
ENGLISH
Send a voicemail message directly
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘VOICE MAIL’ appears on the display.
• Press the OK.
• Press the Up or Down key repeatedly and select ‘OUTBOX’
• Press OK to confirm and to enter the list of all buddies
• Press the Up or Down key repeatedly to scroll to the buddy you want to send a
voice message
• Press the VoIP-key to start the recording
• To end the recording, press the VoIP-key again. To voicemail message will be send.
7.4 SJ-Phone/Net2Phone interface
MAKE SURE YOU HAVE SELECTED ‘SJ-Phone’ or ‘Net2Phone in the Butler 4812 program:
7.4.1 Incoming call
• When you receive an incoming call the ‘EXT’ will blink together with the ‘PC’ logo to
indicate it’s a PC call.
• Press the VoIP-key to answer the call
• To end the call press the line or VoIP-key
7.4.2 Making a PC call
• Enter the telephone number you want to dial
• Press the VoIP-key to dial out the number
• To end the call press the line or VoIP-key
You can also enter the voicemail menu directly by pressing and holding the
‘1’ or -key.
VoIP
VoIP
This section describes the operation under SJ-Phone/Net2Phone!
VoIP
VoIP
VoIP
VoIP