Topcom 4056C Telephone User Manual


 
22 Topcom Butler 4056/4056C
Topcom Butler 4056/4056C
‘REMOVE HS’ appears on the display.
Dial the number of the handset you want to remove (1 –5). Use the number keypad.
Press the Programming key .
‘REMOVE HS’ appears on the display and the handset is removed
NOT SUB’ appears on the handset removed.
4.26 Selecting a base unit
If your handset is subscribed to several base unit stations (max. 4) , you must select a base
unit because the handset can only communicate with one base unit at a time. There are two
possibilities:
4.26.1 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the
closest base unit in standby.
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘AUTO’ appears on the display.
Press the Programming key .
‘SEARCHING’ and the symbol appear on the display.
A signal sounds once the handset has found a base unit.
4.26.2 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you
have set.
Press the Programming key .
Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.
Press the Programming key .
Press the Up or Down key repeatedly until ‘MANUAL’ appears on the display.
Press the Programming key .
‘BASE -‘ appears on the display.
Enter the number of the base unit you want to select (1-4). Use the number keypad.
Press the Programming key .
‘SEARCHING’ and the symbol appear on the display.
A signal sounds once the selected base unit has been found.
Notes:
Before you can select a base unit, the base unit must be subscribed to the
handset first.
If ‘NOT SUB’ appears on the display, this means the selected base unit does
not exist or the handset has not been subscribed.