Filter
Top Products
Butler 3900/Twin/Triple/Quattro
ENGLISH
Butler 3900/Twin/Triple/Quattro 23
2. Select PHONE BOOK using up and down keys
3. Press
4. Select DELETE using up and down keys
5. Press
6. Move through the name list using up and down keys, the list scrolls in alphabetical
order
7. Press to confirm when you find the name you want to delete or press Cancel C key
to stop
9.1.4 Delete all entries
1. Enter the menu by pressing
2. Select PHONE BOOK using up and down keys
3. Press
4. Select DELETE ALL using up and down keys
5. Press
6. Press to confirm when ‘CONFIRM?’ appears or press Cancel C key to stop
9.2 SETUP PREFIX MEMORY
1. Enter the menu by pressing
2. Select HANDSET using up and down keys
3. Press
4. Select PREFIX MEM using up and down keys
5. Press
6. Enter the prefix number or press Delete C key to delete
7. Press to validate
9.3 SEARCHING A HANDSET FROM THE BASE
When Paging button on the base is pressed, all the registered handsets will ring. This
ringing will help you locate a lost handset. By pressing Paging button again or pressing
one of the handset keys, the ringing stops.
10. MANAGING MULTIPLE HANDSETS
10.1 SETTING UP AN ADDITIONAL HANDSET
You can register new handsets on the base if these handsets support the DECT GAP profile.
The base can support a maximum of 4 handsets. If you already have 4 handsets, and you
want to add another one or change one handset, you must first remove a handset, then
associate the new handset.
To register any handset, the base must be put into a special registration mode:
1. Press and hold the paging key of the base for 4 seconds.
2. The base will then emit a beeptone. The base is now ready to register a new handset.
You have 10 minutes after pressing the button to register a new handset.
After getting the base into registration mode, start the procedure on the new handset:
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK
INT
OK