Filter
Top Products
14 Topcom Allure 270
Topcom Allure 270
11.1 Adding a number to a Direct Memory
• Press M1 for 2 seconds.
• Enter the telephonenumber.
• Press the desired Direct Memory key (M1-M3)
11.2 Calling a Direct Memory number
• Press the desired Direct Memory key, the stored number is displayed.
• Press handsfree or pick up the handset.
12 Sleep mode
To avoid that you are disturbed during a specific period, you can activate the sleep mode.
The telephone will not ring during sleep mode, except for calls dedicated as VIP in the call
list. VIP calls will always ring.
Once the sleep mode time is past, the telephone will always ring.
• Press for 2 seconds
• Press repeatedly to select the sleep time (0-24 hours in steps of 1 hour)
• Press to confirm, the sleeptime is displayed
13 Answering machine
13.1 Recording an outgoing messages (OGM)
13.1.1 OGM1
OGM1 is the Outgoing Message that each caller will hear when your answering device
answers the call.
To record the Outgoing Message 1:
• Press and hold .
• After you hear a beep, release and start saying your outgoing message (max 30
seconds).
• Press again to end recording.
• The device will playback the recorded message after a beep.
To check your OGM1 again, press briefly.
When no outgoing message is recorded, a pre-programmed OGM will be used.
Direct memories can only be overwritten, not erased.
To disable the sleep mode, press .