Filter
Top Products
Topcom Allure 270 11
Topcom Allure 270
ENGLISH
9.3 Talking Caller ID
When the Talking Caller ID is activated, the incomming telephone number will be announced
through the speaker. Also when you scroll through the call list or phonebook, the number is
announced.
To set activate/deactivate the Talking Caller ID:
• Press for 3 seconds, the display language is shown.
• Press until ‘VOICE OFF’ or ‘VOICE ON’ is displayed.
•Select ‘VOICE ON’ and times the number has be announced (1-3) by pressing or .
•Select ‘VOICE OFF’ to disable the Talking Caller ID.
• Press confirm the prefix.
9.4 Scrolling through the Call List
You can scroll through the Call list by pressing or .
If no button is pressed within 10 seconds, you will return to standby mode.
9.5 Calling a number from the Call List
• Select the desired telephone number.
• Press . The number will be dialled automatically in handsfree mode.
If you want to dial the prefix (See 8.2.5 ”Setting the Prefix”), press twice.
• Pick up the handset if you want to communicate over the handset.
9.6 Erasing numbers from the Call List
9.6.1 Erasing one number
• Select the number you wish to erase.
• If the Talking Caller ID is activated, wait until the announcement is finished.
• Press briefly. “ERASED” appears on the display.
• Press or , the next number in the call list is displayed.
9.6.2 Erasing the entire Call List
• Enter the Call List and select a number not indicated with VIP (See 9.7 ”VIP list”)
• If the Talking Caller ID is active, wait until the announcement is finished.
• Press for 2 seconds , “ALL ERASED“ appears on the display.
If no button is pressed within 10 seconds, the unit will return to standby mode.
When erasing the entire call list, VIP numbers will remain saved (See 9.7 ”VIP list”).
9.7 VIP list
Numbers can be protected to be removed out of the call list when selecting ‘ERASE ALL’.
Therefore the number must be assigned as VIP.
All VIP numbers are visible in the Call list, but can also be checked in a separate VIP list.