Filter
Top Products
20 Topcom Butler 2550
ENGLISH
7.3 OPERATION
If a call is received and the answering machine is turned ON, the answering machine will automatically answer the call
after the set number of rings.
If outgoing message 1 has been selected, the message will be played, a beep will be heard and the caller can leave
a message (max. 3 minutes).
If outgoing message 2 has been selected, after the beep, the line will automatically be disconnected. The caller doesn’t
have the possibility to leave a message.
Note: If, during pick-up, nothing is said for 8 seconds, the line will be automatically disconnected.
Important: Due to noise on your telephone line, it’s possible that the device will not disconnect
automatically, but record up to max. 3 minutes.
The recording will be interrupted as soon as you take the line. If the unit continuous recording, press
on the base.
7.3.1 Call screening
This function is convenient if you only want to answer certain calls. During incoming call it is possible to screen the call
and hear who is calling if the speaker volume is not set to minimum. You can also screen the call by the handset by
pressing ‘OK’ when ‘SCREEN?’ appears on the display. You can hear the outgoing message and the caller who is
leaving a message.
7.4 REMOTE OPERATION
The answering machine can be operated remotely using a touch-tone phone (DTMF tone selection system).
The remote control is menu operated.
a.To enter the remote operation
• Call your machine.
• The answering machine picks up the line, you hear the outgoing message and a beep.
• After the beep, press ‘*’ long. The unit will ask to enter the VIP code
• Slowly dial the VIP code (default 123).
• If the VIP code is incorrect the unit will confirm and ask you to re-enter. If the VIP code is correct and the unit has
new messages, it will start to pronounce the amount of new messages and also play them. When all messages
are played, the unit will ask you to press ‘5’ to delete current played messages, or ‘1’ to hear main menu.
• If the unit doesn’t have any new messages it will say so and ask you to press ‘1’ for main menu.
b. Main Menu
Press ‘1’ to play back the next menu:
•To play all messages, press ‘2’.
•To play new messages, press ‘3’
•To skip back during messages, press ‘4’
•To delete during messages, press ‘5’
•To skip forward during messages, press ‘6'
•To set answer On/Off, press ‘7’
•To hear Outgoing messages menu, press ‘8’
•To set a new security code, press ‘9’
•To set date and time, press ‘0’
•To hear main menu, press ‘1’
You are not obliged to play the main menu before activating any function.
c.
Outgoing Message Menu
Press ‘8’ in the main menu. The unit shall announce ‘Outgoing message menu’ followed by the outgoing message
menu.
•To hear main menu, press ‘1’
•To play OGM, press ‘2’
•To record ‘answer and record OGM’, press ‘3’
•To record ‘answer and only OGM’, press ‘4’
•To select ‘answer and record OGM’, press 5
•To select ‘answer and only OGM’ press ‘6’
•To hear OGM menu again, press ‘8’
•To hear mean menu again, press ‘1’
B2550_eur.book Page 20 Wednesday, October 23, 2002 3:35 PM