Topcom 1150 Telephone User Manual


 
Topcom Fidelity 1150 11
Topcom Fidelity 1150
ENGLISH
14.12 Remote activation
If the answering machine is OFF, the user can
wake-up the device remotely by dialing the
number and wait for 12 rings.
The machine will answer with OGM2.
Enter the remote code and follow the instructions
explained in chapter 14.11.
14.13 Memory Full
There are 2 kinds of Memory Full situations.
1. During Memo/OGM/ICM recording, the memo-
ry is full.
2. The memory is full and somebody is trying to
record a message.
The unit shall play a message indicating the mem-
ory is full.
When OGM 1 was selected, the device will switch
automatically to OGM2 (see chapter 14.2).
15 Wall mounting
Pull out and rotate the wall mounting hook (25).
Put it back in position.
Measure and mark the wall mounting locations
(28).
Drill holes, fit wall plugs and screw in screws.
The cable of the telephone can be fixed in the slot
(30) on the backside of the phone depending on
the telephone connection position.
Mount the telephone on the screws.
16 Technical Data
Dialling options: DTMF (tone)/PULSE
Flash:100/300/600ms
Power adapter: Input 230VAC 50Hz / Output
9VDC 200 mA
17 Warranty
17.1 Warranty period
The Topcom units have a 24-month warranty pe-
riod. The warranty period starts on the day the
new unit is purchased. The warranty on batteries
is limited to 6 months after purchase. Consuma-
bles or defects causing a negligible effect on op-
eration or value of the equipment are not covered.
The warranty has to be proven by presentation of
the original purchase receipt, on which the date of
purchase
and the unit-model are indicated.
17.2 Wa rranty handling
A faulty unit needs to be returned to a Topcom
service centre including a valid purchase note.
If the unit develops a fault during the warranty pe-
riod, Topcom or its officially appointed service
centre will repair any defects caused by material
or manufacturing faults free of charge.
Topcom will at its discretion fulfil its warranty obli-
gations by either repairing or exchanging the
faulty units or pa
rts of the faulty units. In case of
replacement, colour and model can be different
from the original purchased unit.
The initial purchase date shall determine the start
of the warranty period. The warranty period is not
extended if the unit is exchanged or repaired by
Topcom or its appointed service centres.
17.3 Warranty exclusions
Damage or defects caused by incorrect treatment
or operation and damage resulting from use of
non-original parts or accessories not recommend-
ed by Topcom are not covered by the warranty.
Topcom cordless phones are designed to work
with rechargeable batteries only. The damage
caused by the use of non-rechargeable batteries
is not covered under warranty.
The warranty does not cover damage caused by
outside factors, such as li
ghtning, water and fire,
nor any damage caused during transportation.
No warranty can be claimed if the serial number
on the units has been changed, removed or ren-
dered illegible.
Any warranty claims will be invalid if the unit has
been repaired, altered or modified by the buyer or
by unqualified, non-officially appointed Topcom
service centres.