Filter
Top Products
10 Topcom Fidelity 1150
Topcom Fidelity 1150
14.6 Incoming messages
After the set number of rings the TAD will answer
the call, the caller will hear your outgoing mes-
sage (OGM).If OGM1 is selected, he can record a
message (max 2 minutes) after the beep. As soon
as you have new messages the number of new
messages will be displayed. The recording will be
interrupted when it detect silence for 6 seconds or
when you pick up the handset.
14.7 Memo message recording
To record a Memo message
Memo messages will be stored together with the
incoming call recordings.
14.8 Playing recorded messages
In idle mode:
After all messages have been played, press to
re-play all messages.
14.9 Deleting one messages
During playback of the message.
14.10 Deleting all messages
During playback of the last message.
14.11 Remote control
The answering machine can be operated remote-
ly using a touch-tone phone (DTMF tone selection
system).
•Call your machine. You will hear the OGM
message.
• After the beep, slowly dial the Security code,
you will hear one short beeps for
confirmation.
• Enter the next codes to use the desired
function.
If no button is pressed within 10 seconds, the
unit will return to standby mode.
During playback, the unit will stop every 168
seconds. If no button is pressed, the unit will
stop and hang up.
When pressing ‘2’ the message playback is
paused for 30 seconds. If no button is pressed
the unit will ha
ng up.
3SEC
After you hear a beep, release the
button and start saying your Memo
message (max 2 minutes)
To stop the recording
The unit shall play the new
messages
Every time a message is recorded, the date and
time will also be stored if the date and time is set
(see chapter 7.4). When playing back a
message, the date and time of the recording will
be
announced before the message.
To pause the playback
<1s To replay the message
2 XTo skip to the previous message
To skip to the next message
To stop playback
‘DELETE?’ will be displayed
To confirm and delete the message
If no button is pressed in 30 seconds, the unit
will continue playing the messages
2SEC ‘DELETE ALL?’ will be displayed
To confirm and delete a ll messages
If no button is pressed in 30 seconds, the unit
will continue playing the messages
1
1(1)
2
3
4
5
6
7
8
9
0
#
Replay the message
Play the previous message
Play/Pause
Play the next message
To play the outgoing message
To record a new outgoing message
Stop playback or recordin
g
Delete playing message
Answering off
Answering on / Toggle OGM1 or
OGM2
Delete all, old messages
Record Memo