Technicolor - Thomson TG787 IP Phone User Manual


 
E-DOC-CTC-20080118-0051 v2.0
50
4 Getting the Most O
ut of Your Thomson Gat
eway
4.3.3 Configuring UPnP on the Thomson Gateway
Introduction
On the Thomson Gateway Web Interface you can:
Enable/Disable UPnP
Extended Security
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Thomson Gateway Web Interface.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
Select the Use UPnP check box, to enable UPnP.
Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enable only limited UPnP operation between the host and the Thomson Gateway is
allowed. A local host is not allowed to connect/disconnect the Thomson Gateway Internet connection. You
can then only connect/disconnect the Internet connection on the Thomson Gateway Web Interface.
Enabling Extended Security
Proceed as follows:
1 Browse to the Thomson Gateway Web Interface.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.