Telex BP-2002 Intercom System User Manual


 
8
Latched Mode:
Tap the button once to talk. The indicator will glow
green. Tap the button again when finished with a
conversation.
Momentary Mode:
Press and hold the button to talk momentarily. Release
the button when finished talking.
NOTE:On the BP-2002, if no headset is connected
when the Talk button is pressed, the Talk button will
have the same function as the Chan button.
5. SIDETONE CONTROL: When using a headset, this control
adjusts your own voice level heard in the head
phones. To adjust the level, tap the Talk button once
to turn on the headset microphone. Then, use a small
flat-blade screwdriver to increase or decrease your
voice level while talking into themicrophone. (This
control is accessible by removing one screw of belt
clip.)
6. HEADSET CONNECTOR: This connector accepts a four-
wire Telex® boom-microphone headset.
7. INTERCOM CHANNEL CONNECTORS: On the BP-2002,
intercom channels are connected via a pair of 6-pin
connectors (one male and one female). The male and
female connectors are wired together in parallel,
providing a “loop through” at each connector pin. Use
one connector to connect to the intercom channel.
Use the other connector to “daisy chain” a cable to the
next belt pack or other station on the channel.