Telex BP-2002 Intercom System User Manual


 
7
EXTERNAL CONNECTIONS & CONTROLS
NOTE: The numbers refer to the callouts in Figure 1.
1. VOLUME CONTROL: Use this control to adjust the
headset listen level.
2. CHAN BUTTON AND INDICATORS: The Chan button (only
on the BP-2002) allows the user to select which
intercom channel is active. The yellow indicator next
to the 1 or 2 lights to show the active channel. Press
the Chan button to change the channel selection, the
yellow indicator for that channel will light.
3. CALL BUTTON AND INDICATOR: The Call function allows the
user to send or receive signals to other devices on the
intercom channel selected. The Call button operates
in two ways:
Call receive
: When there is an incoming call signal,
the indicator is red. (If Audible Call Alert is enabled,
incoming calls will cause beeps in the headset.) On
the BP-2002, calls can be received on the selected
channel only.
Call send
: To send a call signal to all stations on a
channel, press and hold the Call button until a verbal
response is received. The indicator will glow red. On
the BP-2002, calls can be sent on the selected
channel only.
4. TALK BUTTON AND INDICATOR: The Talk button activates
the headset microphone and operates in two ways:
Connections and Controls