Telex BP-2002 Intercom System User Manual


 
10
Changing Modes of Operation:
Perform the following steps to change the mode of operation.
1. Both the Talk and Call indicators should be off.
2. Press and hold the Talk key, then press and hold the
Call key, then release both keys. The Call indicator
should now glow red.
(The number of beeps heard in the headset indicates
the current mode of operation.)
3. Press the Call key to change to the next mode of
operation. Each press of the Call key will cause the
BP-1002/BP-2002 to change to the next mode of
operation.
4. When the desired mode is reached, press the Talk
key to select that mode and exit the mode changing
function. (Beeps will be heard in the headset when the
mode changing function is exited. The number of
beeps heard indicates the selected mode of operation.)
NOTE: Each time the intercom system power is turned on, the
beltpack will reset to the default mode of operation (Mode 2).