Filter
Top Products
13
CHANGING CHANNELS
Your ET-539’s Auto-Scan feature au-
tomatically selects the clearest chan-
nel when you pick up the phone. If you
experience interference during a call,
press
CH
to switch to the next channel
(25 in all) until you receive the best re-
ception.
USING REDIAL
To quickly redial the last number di-
aled, simply lift the handset from the
base and press
TALK
again so the
CHARGE/TALK indicator lights, then
press
REDIAL
.
The redial memory holds up to 81 dig-
its in the tone mode or 80 digits in the
pulse mode. The redial memory also
holds pause entries (see “Entering a
Pause” under “Memory Dialing”).
Note:
We recommend you not use
RE-
DIAL
to dial numbers that include a
tone (
*
) entry (see “Using Tone Servic-
es on a Pulse Line”).
USING FLASH
Use
FLASH
on the handset to perform
the switchhook operation for special
services, such as call waiting.
For example, if you have call waiting,
press
FLASH
to take an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the first
call.
Notes:
• If you do not have special phone
services, pressing
FLASH
might
disconnect the current call.
• The redial memory does not store
a
FLASH
entry or any digits
entered after you press
FLASH
.
43-1039.fm Page 13 Tuesday, August 17, 1999 10:12 AM