Filter
Top Products
Section 2F: Using Contacts 113
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer Types”on
page 49.)
To select a ringer type for an entry:
1. From standby mode, press Contacts (right softkey).
2. Select the entry for which you want to set the incoming
ringer and press .
3. Press Options (right softkey) > Edit; or if you are selecting
an email or Web address, press Edit (right softkey).
4. Scroll down to the box next to the icon and press .
5. Select a ringer and press . (When you highlight a
ringer type, a sample ringer will sound.)
6. Press Save (left softkey) to save the ringer type.
Contacts