Filter
Top Products
42 Section 2A: Phone Basics
To place a call using Ph.Book Match Abbreviated Dialing:
1. Enter the last three to six digits of a contact’s phone
number.
2. Press . If there is more than one matched number in
your Contacts list, the Abbrev. Dial list is displayed.
3. Select the name you want to call from the list, and then
press to place a call.
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four or five digits of your desired number.
2. Press .
Tip:
You can also place a call by pressing Options(rightsoftkey) >
Abbrev.Dial
after step 1 above for either Ph.Book Match
Abbreviated Dialing or Prepend Abbreviated Dialing.
Note:
When Prepend is set to Enable and Ph.Book Match is set to
Disable, you can display the 10-digit number (including the
predefined prepend number) by entering the last four or five
digits of the number.
The Pr
epend feature is available when all of following
conditions are met:
· Prepend is set to Enable.
· A pr
epend number has been predefined.
· The combined total (prepend number plus the digits you
enter) is 10 digits.
When both Ph.Book Match and Prepend are set to Enable and
your desired number is not saved in Contacts, you can display
the 10-digitnumber (including the five- or six-digit prepend
number) by entering the last four or five digits of the number.
Note:
When Ph.Book Match is set to Enable and your desired
number is saved in Contacts (regardless of whether Prepend is
enabled or disabled), you can display the number by entering
its last three to six digits.