Filter
Top Products
22
Troubleshooting
4. Press
TALK
. The selected service num-
ber appears and is dialed.
Note:
You can display the programmed ser-
vice number of each calling feature. At Step
2 above, press
7
77
7
to view the number and
6
66
6
to return to the name display.
Editing Advanced Service Names
and Numbers
You might need to change the number
stored in any of the three service locations,
for example, if your phone company uses dif-
ferent number sequences from the pro-
grammed ones.
Follow these steps to edit a key sequence.
1. Lift the handset.
2. Hold down
MENU
until
Select
to
Edit
and a list of calling features
appears.
3. Choose a calling feature by pressing a
number (
1
–
3
) or
VOL/CID
8
88
8
or
9
99
9
.
4. Press
SELECT/CHANNEL
. A menu listing
Edit
,
Restore
, and
Go
Back
appears. Press
VOL/CID
8
88
8
or
9
99
9
to
highlight the desired option then press
SELECT/CHANNEL
to choose it.
Edit
—
Service
name
appears.
Edit the service name and press
SELECT/CHANNEL
. Then,
Service
number
appears. Edit the number and
press
SELECT/CHANNEL
. Enter the
name and number as described in Steps
5 through 8 of “Storing a Number in the
Handset's Memory” on Page 16.
Restore
— prompts you to confirm
the restoration. If you want to return to a
preprogrammed calling feature, press
VOL/CID
8
88
8
to move the cursor to
Yes
,
then press
SELECT/CHANNEL
. The
phone beeps, and
Service
Setting
Restored
appears.
Go
Back
— returns you to the list of
service numbers.
ˆ
Troubleshooting
We do not expect you to have any problems with your phone, but if you do, these suggestions
might help.
Problem Suggestion
The phone does not work prop-
erly.
Be sure the base's phone line cord and AC adapter are correctly and
securely connected.
Be sure the battery pack in the handset is connected and charged.
Return the handset to the base for about 5 seconds to reset the secu-
rity access-protection code.
The display flashes slowly
when the handset is faceup on
the base.
Make sure the battery pack in the handset is properly connected.
43-5522.fm Page 22 Tuesday, September 12, 2000 3:12 PM