Filter
Top Products
13
Telephone Operation
2. Press
2
or
VOL/CID
9
99
9
to select
CIDCW
(Caller ID/Call Waiting).
3. Press
SELECT/CHANNEL
to change the
Caller ID/Call Waiting setting.
On
or
Off
appears.
4. Return the handset to the base to store
the new setting.
STORING YOUR AREA
CODE
You can store your local area code in the
phone's Caller ID record so it does not show
the area code if the received call is from your
local area. If for some reason you need to
dial the area code (or store it in the memory),
you can add it afterwards. See “Adding/De-
leting the Area Code” on Page 20.
Note:
If your calling area requires 10-digit di-
aling including area code, do not enter the
area code but leave this option blank.
Follow these steps to store your area code.
1. Lift the handset and hold down
CID
.
2. Press
3
or
VOL/CID
9
99
9
twice to select
Area
Code
.
3. Press
SELECT/CHANNEL
, then enter
your three-digit area code. If you make a
mistake, repeatedly press
6
66
6
or
7
77
7
to
move the cursor over the incorrect digit,
then enter the correct number.
Note:
If an area code is already stored,
it appears on the display. To delete the
area code, press
INTCM/DEL
three times
or hold down
INTCM/DEL
, then enter
your. area code. You can use
6
66
6
or
7
77
7
to move the cursor and edit the area
code.
4. Press
SELECT/CHANNEL
to store the
area code, then press
CID
or return the
handset to the base to clear the display.
ˆ
Telephone Operation
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and press
TALK
.
Talk
and the current volume setting
(see “Adjusting the Handset Volume” on
Page 14) appear, and the CHARGE/IN USE
indicator on the base lights. Then dial the
number. The number appears as you dial,
then (after a few seconds) the call's elapsed
time appears.
You can also dial the number then press
TALK
.
Talk
and the current volume setting
appear, and the CHARGE/IN USE indicator
on the base lights. The number you entered
and the call’s elapsed time appear.
If you make a mistake, press
INTCM/DEL
until
the incorrect entry is erased, then enter the
correct number. To delete the entire number,
hold down
INTCM/DEL
for at least 1 second.
When you receive a call,
Incoming
Call
appears. To answer it, lift the handset from
the base and press
TALK
. If auto talk is on,
just lift the handset from the base. If the
handset is away from the base, press any
key.
Talk
and the current volume setting
appear.
To end a call, place the handset on the base
or press
TALK
.
43-5522.fm Page 13 Tuesday, September 12, 2000 3:12 PM