Filter
Top Products
11
Installation
Important:
The EPA certified
RBRC
®
Battery Recycling Seal
on the nickel-cadmium (Ni-Cd)
battery indicates RadioShack
is voluntarily participating in an
industry program to collect and recycle these
batteries at the end of their useful life, when
taken out of service in the United States or
Canada. The RBRC program provides a con-
venient alternative to placing used Ni-Cd bat-
teries into the trash or the municipal waste
stream, which may be illegal in your area.
Please call 1-800-THE-SHACK (1-800-843-
7422) for information on Ni-Cd battery recy-
cling and disposal bans/restrictions in your
area. RadioShack’s involvement in this pro-
gram is part of the company’s commitment to
preserving our environment and conserving
our natural resources.
A QUICK LOOK AT THE HANDSET
Note:
The handset window has plastic film on it to protect it during shipment. Carefully peel off
the film before using your phone for the first time.
Use VOL/CID
8
88
8
/
9
99
9
to adjust the handset
volume (see “Adjusting the Handset
Volume” on Page 14), set the ringer/
tone volume (see “Setting the Ringer
Tone/Volume” on Page 12), view Caller
ID records (see “Caller ID Operation” on
Page 19), or select options.
Use FLASH to select
the phone's flash
function (see “Using
Flash” on Page 15).
Use INTCM/DEL to page someone
at the base or transfer a call to the
base (see “Using Page/Intercom”
on Page 15), locate the handset, or
to erase information if you make a
mistake.
Use TALK to make a
call (see“Making and
Receiving Calls” on
Page 13).
Press /TONE to use your
phone company's special
tone services when you are
on a pulse line (see “Using
Tone Services on a Pulse
Line” on Page 15).
Use MEM to store or re-
call names and numbers
in memory (see “Memory
Dialing” on Page 16).
Use RDL/PAUSE to redial
one of the last three numbers
dialed (see “Using Redial” on
Page 14) or store a pause in a
number (see “Entering a
Pause” on Page 17).
Use CID to review Caller
ID records.
Use MENU to activate the
phone company's network
services (see “Using the
Phone Company’s Network
Service” on Page 21).
Use SELECT/CHANNEL to se-
lect the phone's channels (see
“Selecting the Channel” on
Page 14), and other options.
43-5522.fm Page 11 Tuesday, September 12, 2000 3:12 PM