Filter
Top Products
LIVE DIALPAD XXX
PRESS 1=ON 2= OFF
Set up using keypad dial-
ing with automatic
speaker activation or
using key pad dialing and
pressing dial key to act i-
vate.
Live Dialpad Feature
(Administrator Programmable Only)
This feature allows the Administrator to set
up the telephone keypad ON HOOK dial-
ing method.
When LIVE DIALPAD is OFF, and the
handset is ON HOOK, the user enters a
number on the keypad must then press the
“DIAL” key to activate dial tone.
When LIVE DIALPAD is ON, and the
handset is ON HOOK, the dial tone acti-
vates immediately upon pressing the key-
pad.
The handset can be lifted at any time to ac-
tivate the receiver.
To enable or disable LIVE DIALPAD ON.
1. Press and hold the “STORE” key for
6 seconds.
2. Press “STORE” multiple times until
the LCD displays “LIVE DIALPAD
ON”.
3. Press “1=ON” to enable, or “2=OFF”
to disable.
4. To exit the program mode, press
“DISC” or continue to the end of pro-
gramming by pressing the “STORE”
key multiple times until the display
reads “All Setup OK”.
LIVE DIALPAD ON
12/01
PM
12:00
PRESS 1=ON 2=OFF
12/01
PM
12:00
Display indicates condition of ON or OFF, then next screen ap-
24
NOTE: The Live Dialpad feature works only when the
handset is ON HOOK, it does not work when the handset
is OFF HOOK.
!
Note: Programming can
only be performed when
phone is on-hook
!