Filter
Top Products
System Hold Feature Option Switch
(Administrator Feature)
A hold feature switch is located on the
bottom of the phone. The switch options are
standard “LINE” hold or programmable*
“SYSTEM” hold.
The standard line hold allows for normal
hold function operation. The programmable*
system hold feature is used for optional
system operations.
The switch default is standard line hold.
* Programming System Hold is an Administrator function.
To program System Hold, follow the speed dial instructions
in this manual. To store the dialing pattern, press the HOLD
key in place of the memory location.
21
LOW VOLT MW
ON OFF
LOW VOLT MW
ON OFF
Low Voltage LED Switch
A low voltage LED switch is located on the
bottom of the phone. The switch options are
ON or OFF. The factory default is OFF.
.