SpectraLink Corporation LinkPlus Interface Guide
Siemens ROLM PBX System
Set Up the handset
• For each handset, set up a ROLMPhone defined as RP_400.
• Associate this RP with the template table as displayed.
• Assign extensions (trunks and lines) to buttons as determined in planning
process.
Assign the Port
Assign the handset’s table and extension to the appropriate port.
The installer can now test the handsets.
Program Hicom 300E
To program the Hicom 300E to emulate a flashhook button on the handset,
program the Siemens button 29 as a XFER (Transfer) key.
This programming will enable users to access the following features.
Transfer START – dial number – END
Conference START – dial number – START
Conference – Drop Last Call START - ****4 – START
Conference – Drop Designated Call START - **4x – START
Hold HOLD
Hold Return START, LINE #
Part Number: 72-0171-13-C.doc Page 13