Filter
Top Products
SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks ICP and 5220 IP Phone emulation
PN: 72-1084-02-B.doc Page 11
3.2 The Display
Alphanumeric
Display information provided by the supported Mitel Networks VoIP solution when the
Wireless Telephone is off-hook will be passed directly to the Wireless Telephone display.
The Wireless Telephone will display up to 18 characters of each line. Certain characters
may be used by the supported Mitel Networks VoIP solution that are not implemented in
the Wireless Telephone such as definable and special characters.
Press the FCN key while off hook to scroll through features and emulated keys. Press the
LINE key while off hook to scroll through the line/memory keys.
Voicemail Icon
The Voicemail icon is controlled only by the OAI application.
Ringing and Tones
The ringing types are programmed by the Wireless Telephone user into the Wireless
Telephone and are not accessible or changeable by the supported Mitel Networks VoIP
solution. Whenever possible the audible and vibrating ringer on the Wireless Telephone
will follow the MiNET cadence commands provided by the supported Mitel Networks
VoIP solution.
Audio Features
Speakerphone features such as paging, hands-free mode and voice announce are not
available on the Wireless Telephone. The telephony switch should not be programmed to
support such features on the Wireless Telephone.
Line Indicators
The line indicators on the Wireless Telephone will convert to a solid or flashing number
to mimic the icons next to Line keys on the Mitel Networks 5220. The text that appears
next to the line keys on the 5220 IP Phone is accessed on the Wireless Telephone by
pressing the LINE key.