Filter
Top Products
SOYO G668 Ethernet IP Phone User Guide
7
Installation
Depending on your network environment, you will need to perform one of the
following installations:
Installation with a Single Computer
Installation with a Home or Office Network
Installation with a Single Computer
Note: Some Internet Service Providers provide only one public IP address.
Therefore the computer and the IP phone can NOT be online at the same
time. Using a router is highly recommended.
1. Connect one end of the Ethernet RJ-45 cable to the broadband modem,
and connect the other end of the cable to one of the RJ-45 WAN ports at
the rear of the G668 IP phone.
2. Connect one end of another Ethernet RJ-45 cable to your computer, and
connect the other end of the same cable to the LAN ports at the rear of the
G668 IP phone. (This is an optional step. IP phone can work without the
computer)
3. Connect the power adapter to the AC outlet and the power jack at the rear
of G668 IP phone.
4. Once the IP Phone is powered up, the booting sequence will begin. You
will see the following information displayed on the LCD screen:
LAN WAN
IP Phone
Ethernet port
Ethernet port
Broadband
Modem
Computer
(Optional)