Filter
Top Products
SOYO G668 Ethernet IP Phone User Guide
9
Installation within a Home or Office Network
1. Connect one end of the Ethernet RJ-45 cable to an open Ethernet LAN
port on your router, and connect the other end of the cable to the WAN port
at the rear of the G668 IP phone.
2. Using another RJ-45 cable, you can connect one end of the Ethernet
RJ-45 cable to your computer, and connect the other end to the LAN port
at the rear of the G668 IP phone. (This is an optional step. IP phone can
work without the computer)
3. Connect the power adapter to the AC outlet and the power jack at the rear
of G668 IP phone.
4. Once the IP Phone is powered up, the booting sequence will begin. You
will see the following information displayed on the LCD screen:
Booting …
È
DHCP
Connecting …
È
Ready For Calls
SOYO_Group
LAN
WAN
WAN
IP Phone
Broadband
Modem
Computer 1
Computer 2
Router
Computer
(Optional)
LAN