Filter
Top Products
14
CALLER ID SETUP
To Set Language
1. After the Handset battery is fully charged, the LCD
display will show “SET LANGUAGE”.
2. Press the REVIEW “▲” or “▼” button to select
ENGLISH, FRENCH or SPANISH.
3. Press the MEM key to confirm the displayed
language. The unit will begin to set area code.
To Set Area Code
1. Simply enter your area code number using the
number pad on the handset. Press the MEM key to
confirm.
2. The unit will begin to set the contrast.
NOTE: If there is no input within 20 seconds, the
program will go back to the “SET LANGUAGE” step.
To Set Contrast
1. Press the “▲” or “▼” button to adjust the display
contrast to the desired level (darker or lighter). If
there is no input within 20 seconds, the program will
go back to the “SET LANGUAGE” step.
2. Press the MEM key to confirm the displayed contrast
level. The unit will show the default Time/Date (12:00 A.M.
1/01). The time and date will be automatically updated
when the first incoming Caller ID call is received.
NOTE:
1. The Caller ID setup procedure will not begin until the handset is fully charged.
2. To set up your GH3012 again, press and hold the MEM button for 2 seconds in
Date/Time screen.
3. Your GH3012 will always stay in setup mode, until you complete the setup steps.
However, it will still record the Caller ID information. This information can be
reviewed only after set up is complete.
4. To adjust the LCD display contrast while in the standby or review mode, press the
FLASH button.
15
TELEPHONE OPERATION
Tone / Pulse Operation
The GH3012 will operate on tone or
rotary (pulse) systems.
1. If your house is wired for rotary
service, move the Tone/Pulse switch to
the Pulse position.
2. If your house is wired for Tone
Service, move the Tone/Pulse switch to
the Tone position.
3. If you are unsure of the type of
dialing service you have, set the switch
to Tone. On the handset, press the TALK
button and dial any digit on the keypad.
If the dial tone persists, switch to Pulse.
To disconnect, press the TALK button
again, or set the handset in the cradle.
Digital Security System
Your GH3012 Cordless Telephone is
equipped with a digital security coding
system to protect your base unit from
being accessed by other cordless
telephones.
The code allows your base and handset
to recognize each other so that other
cordless phones will not make calls on
your line.
If the AC adaptor is disconnected or a
loss of power occurs while the handset is
away from the base unit, the security
code will be lost and the phone will be
inoperable. If this occurs, reconnect the
AC adaptor and return the handset to the
base unit so that the security code is
reset.
When the handset is not in the base, only
a handset having the identical security
code and operating on the same channel
can access the base and use your phone
line.
When the handset is in the base, no
other handset, even those having the
identical security code and operating on
the same channel can access the base
and use your phone line.
Digital security coding will also eliminate
the “false” ringing associated with
cordless telephones not equipped with
this feature.