Southwestern Bell FM2560 Telephone User Manual


 
Memory Dialing
If you wish to enter a 4-second Pause in the number you are storing,
press the REDIAL Button at the desired point in the number.
Memory Dialing
Your FM2560 is equipped with 10 memories for programming your
most frequently dialed telephone numbers. You can store up to 16
digits in each of the numeric keys 0 through 9 by following the steps
outlined. Numbers must be stored with the handset lifted.
To Program Frequently Called Numbers:
1. Lift the handset. You will hear a dial tone.
2. Press the STORE Button.
The LCD will show "STORE".
3. Dial the phone number you
wish to store (16 digits
maximum). The LCD will
show the number you dialed.
4. Press the STORE Button again.
5. Press one of the 10 memory
location buttons 0-9. Your
number is now stored in the
corresponding location. The
LCD will show the memory
location.
6. To continue programming numbers, return the HANDSET to the
CRADLE. Lift the handset, and repeat steps 2 through 5.
NOTE: YOU MUST COMPLETE STEPS 2-5 WITHIN 10
SECONDS, OR ELSE YOU WILL HEAR AN ERROR
MESSAGE FROM THE TELEPHONE COMPANY AND WILL
BE EXITED FROM THE MEMORY MODE.
16 17
NEW
CALL
AM
NEW
CALL
AM
NEW
CALL
AM
New Call LED Indications
SITUATION
No new call
Off
Flash
Flash 4 times each time the phone rings.
Flash 4 times every 6 seconds until
the call disappears.
There is a new call.
When receiving a VIP call.
When the incoming VIP
call is a call waiting caller
ID call.
NEW CALL LED INDICATOR
To Dial Frequently Called Numbers:
1. Pick up Handset.
2. Press MEMORY Button. The LCD will show
"MEM".
3. Press the desired memory location Button (0-9).
4. Your call will automatically be dialed.
To Erase A Stored Number
To erase a stored number, simply store a new number in the same
location. The new number will replace the old one.
Caller ID Features
MEMORY