Filter
Top Products
Telephone Features
FLASH
If call waiting is available from your telephone company and you have
this service, you will be alerted by a signal (determinded by your
telephone company) if there is another call.
PAUSE
You can insert a 4-second PAUSE into the dialing or storing of a
Note: The telephone will be muted momentarily while the LCD
display shows the Caller ID information.
1. When you hear the signal, to access the new call without
disconnecting the call you are on, press the FLASH Button.
2. To return to your original conversation, press the FLASH Button
again. This procedure can be repeated as frequently as you desire.
The FLASH Button can also be used to access a new dial tone without
hanging up, and also to signal PBX or to activate various services if
you are connected to PBX. If the FLASH Button is pressed, the LCD
display will be cleared until the number is entered.
RINGER OFF/LO/HI SWITCH
Your FM2560 features a ringer which can be adjusted to loud (HI) or
soft (LO). When you don't want to be disturbed, set the switch to
"OFF". You can still make outgoing calls.
LIGHTED KEYPAD
For better visibility when dialing in a dimly lit room, a lighted dial pad
is provided.
RECEIVER VOLUME CONTROL
The RECEIVER VOLUME CONTROL is located on the side of your
handset. This control allows you to adjust your handset volume from
normal to high for a more comfortable listening level.
14
15
Telephone Features
REDIAL BUTTON
The last number you dialed (up to 32 digits) is automatically stored in
redial memory. To redial that number:
A. Lift the HANDSET. You will hear a dial tone.
b. Press the REDIAL Button. The last number dialed is automatically
redialed, including any pauses. The LCD will display "REDIAL".
Note: No redial function is executed if the last number is more than 32
digits. "FULL" will be displayed.
MUTE BUTTON
Prevent sound from your room from being heard by another party on
the phone.
Press and HOLD the MUTE Button for as long as you want this
feature activated.
RESET BUTTON
At the end of a call, you can make your next call without replacing the
HANDSET in the cradle. Press and hold RESET to disconnect the
telephone.
HEARING AID COMPATIBILITY
The FM2560 is compatible with inductively coupled hearing aids.
number into memory in order to access custom and telebanking
services, long distance, etc. Press the PAUSE (REDIAL) button at the
desired point in the number. Press PAUSE (REDIAL) again if an
additional 4 seconds are needed.
CALL TIMER
When you dial a call, after the first 8 seconds, the call timer will
appear on the display for you to track the conversation time. It will
disappear 8 seconds after you hang up.