Filter
Top Products
Additional Information58
US
Mounting the base unit on a wall
1 Raise the hang-up tab.
2 Plug the telephone line cord(s)
to the L1/L1+L2, and/or L2,
DATA jack(s) and the AC power
adaptor to the DC IN 9V jack,
and hook the cords.
3 Attach the wall bracket to the
center of the base unit.
Align the f marks of the wall
bracket with those of the base
unit.
4 Plug the telephone line cord(s)
to the telephone outlet(s), and
hook the base unit to the wall
plate.
5 Plug the AC power adaptor to
an AC outlet. Then raise the
antenna so that it points
towards the ceiling.
Tip
To remove the wall bracket, press the lower tabs.
Additional Information
1
2
Hang-up tab
Telephone
line cord
AC power
adaptor cord
3
Wall
bracket
4,5
Telephone
line cord
AC power
adaptor
Wall
plate
AC outlet